Honeycomb Storage Wall Filler Solidworks Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the hexagon fill pieces for the Honeycomb Storage Wall System to include Solidworks and STEP files.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I remade these parts in Solidworks to allow me to make some more complex assemblies for my own HSW project but these files could also help others if needed. I also exported the individual pieces to STEP to make customization in other pieces of software a bit easier.
As mentioned from the original creator, these will use more filament than you think and they are entirely aesthetic. I had a bunch of old filament laying around that I used for this project.
Important note: the half pieces are 'true' half pieces dimensionally as the border I made for my project was using exact halves of the hexagons. I later found out most borders do not use true halves. It is not one to one dimensionally from the original design and I may upload the original half in future.