Universal Tip‑to‑Open Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact tip‑to‑open unit with 4 parts, replaceable hook, and spring‑loaded action.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 814
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 17.04.2026
I added a "hook"-Version (T2O - Tape_mount), where you use double sided tape, so it is less visible:
This is a universal, adjustable tip‑to‑open mechanism designed to be mounted on any wooden board inside a cabinet. Simply attach it, and it works as a reliable push‑to‑open solution for doors or drawers. The hook element is fully replaceable, making the system long‑lasting and easy to repair.
Features
Replaceable hook for long‑term durability
Available in 1 mm increments from 10–25 mm
Base and slider rod print without supports
Hook requires minimal support
Two slider versions included:
Standard slider
Slider with rubber foot
Compact, universal design suitable for most cabinet setups
Remix of an existing mechanism — original creator is credited for the functional concept
Printing Recommendations
Part | Supports | Notes |
|---|---|---|
Base | No | Print flat for strength |
Slider | No | Choose version based on your application |
Rod | No | Smooth print improves sliding |
Hook | Yes | Only small supports needed |
Printed and tested with 0.2mm PETG GEEETECH
Required Hardware
Compression spring: 9 × 35 mm
Countersunk screw: M3 × 10 mm
Rubber feet: 6mm Link
Assembly Overview
Print the base, slider, rod and hook.
Insert the 9×35 mm compression spring into the slider channel.
Insert the slider + Spring into the base
Screw on the rod to the base while the pin is in the path on top of the slider
Slide the Hook onto the base
Choose your preferred slider version (standard or rubber‑foot).
Adjust hook length (10–25 mm options) to match your cabinet geometry.
I recommend to add a drop of lubricant for the mechanism to work smoothly.
Credits
This model is a remix. The mechanism concept is based on the work of the original creator, who deserves full recognition for the underlying design idea. (Original link will be added.)
Model:
Creator:
https://www.printables.com/@A548