Matrix Pixel Rain - One-piece front
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiles, diffuser and grid printed in a single piece - Much easier to assemble and less light leakage.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Print the front in the following way. Depending on your layer height. My printer is set up for 0.2mm layers.
Print the first 5 layers with black filament (1mm) the next 3 with white filament (0.5mm) and the rest with black filament. Either pause your printer, or I fool mine with a switch on the filament runout sensor.
The rear cover comfortably holds a Wemos D1 ESP8622 mini that I loaded with wled and selected the matrix effect (or an ESP32 micro).
There is two versions - one that is a 2 X 8 X 8 module, or a single 16 X 16 module.
There is also two versions of the back for the 2 X 8 X 8 module - for a D1 and one for an ESP32 micro.
If you would like to make a supersized version using LED strip, simply resize it - a standard 60 led per metre strip has a 16mm LED pitch, versus a 10mm led pitch (so 160%) - though for a 16X16 you will need a large printer bed.