Morgan 30L Stainless Steel Pedal Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Morgan 30L Stainless Steel Pedal Bin (Bunnings p4520215) — Lid Hinge Replacement Reverse-engineered drop-in replacement
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Morgan 30L Stainless Steel Pedal Bin — Lid Hinge Replacement
The plastic hinge cap on the Morgan 30L Stainless Steel Pedal Bin (Bunnings SKU p4520215, ~$28.95) is a known failure point. The original part becomes brittle over time and snaps, leaving the lid unsupported. Rather than replacing the whole bin, this drop-in replacement restores full functionality.
This is a reverse-engineered replica of the OEM hinge cap that sits on top of the hinge bracket and retains the bin lid. It slides directly onto the existing metal bracket — no tools or hardware required.
Print settings:
Material: PETG recommended (more impact-resistant and flexible than PLA)
Infill: 40%+
Walls: 3–4 perimeters
Supports: None required
Orientation: Print flat side down
Compatibility: Designed specifically for the Morgan 30L Stainless Steel Pedal Bin sold at Bunnings Australia. May also fit other Morgan bin variants — check your hinge dimensions before printing.