Technic Gears for IKEA Bilresa Scroll Wheel Remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just some toy gears to improve the grip on the Bilresa scroll wheel
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
As I already designed and published a few models to improve the grip of the Bilresa scroll wheel, I had the idea to use these Technic gears as well.
I find the 24 tooth gear pretty iconic as it reminds me of all the Lego Technic sets I had when I was a kid. Therefore, I used it first and scaled it up to fit the scroll wheel and make printing on my FDM-printer a bit easier. As I was satisfied with the outcome, I also used the 40 tooth gear to see if it prints OK without scaling. I think it turned out quite well, too. Bonus: the 40 tooth gear meshes with the original gears and thus could be driven by a Technic model.
I designed them to have a circular base that can be stuck onto the scroll wheel. I printed the base in white PLA and then switched to light grey PLA for the gears themselves. Layer height was 0.1 mm.