3DBenchy wall hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yes, another hook for 3DBenchy.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a place to display my 3DBenchy collection, and after looking at the available models of mounts, I realized that they are all either inconvenient, or too complicated, or require a ton of plastic. My model for 8 3DBenchy's only requires 24g of plastic with 2 walls and 25% infill.
If you saved some filament or time by using my model, you can thank me here ;) https://ko-fi.com/maxpi
Attention: the model is designed for a printer with at least 410mm diagonal!
UPD: I added another model for 6 3DBenchy for printers with a diagonal of at least 300mm or for batch printing on large machines.
Any plastic that has sufficient layer adhesion is suitable; I printed mine with PETG.