Handbag strap saver for wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach this piece to a wall hanger in order to prevent damage to the strap of the bag.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
This is a piece of plastic that you can attach to your wall hanger pin to prevent damage to the handbag strap caused by bending it too much.
NB! This model attaches to an alredy existing wall hanger with cyllindrical shaped pins.
Instructions
Attach it to the pin and then hang your bag on its strap over the model as shown in the pictures. It should be press-fit and should provide enough grip to stay put. The side on which the holding piece is cut in an angle should be facing forward.
It comes in two sizes:
normal size fits 6 - 6.5mm hanger pins - HandBagHanger.stl
larger attachment fits 8 - 8.5mm hanger pins - HandBagHanger8mm.stl
Prining instructions
Print vertically laying on the back side. PLA is enough, 15% infill.