Disconnect-Me-Not Light Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a switch cover to prevent inadvertent turning off of Philips Hue lights, while allowing the switch to be…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a switch cover to prevent inadvertent turning off of Philips Hue lights, while allowing the switch to be worked if needed. STL and source SKP files are provided so you can remix your own.
This version has been designed and tested to fit standard US-style light switches and coverplates.
Printed at 0.3mm, the curved surface is a bit rough; it could be sanded or printed at a finer resolution if desired.
No supports should be necessary.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3 or as desired
Infill:
15% or as desired
Category: Household