Galaxy Z Fold 3 Case - Convert to full-time tablet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert a Galaxy Z Fold 3 into a full-time tablet
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
My Fold 3's outer screen is dead, so I modified a Fold 3 case so that I can use it as a full-time tablet.
There's 2 variants:
case with S-pen slot
case with no S-pen slot
Note that the case fitting can be very tight, you might want to consider scaling it up a tiny bit for an easier time fitting it on your device.
Also note that I'm a novice when it comes to modifying 3d models. For this model, you may need to smooth some sharp corners or edges with sandpaper or a file.
And finally, the magsafe ring is not really useful unless you use an accessory with very strong magnets. The typical magnets I've tested are all too weak.