1 / 2
Feeding Tube Holder Clip for IV pole — zdjęcie 1
1 / 2

Feeding Tube Holder Clip for IV pole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This clip was needed to hang my daughters feeding tube on a Pitch-It Sr. IV Pole.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I created this Feeding Tube Holder Clip for an IV pole from the awesome original CPAP Bracket file.  Two sizes are provided to fit the top and 2nd IV pole sections of approximately 15.8mm and 18.7mm diameter tubes on a Pitch-It Sr. IV Pole. Can be tweaked in a slicer for larger or smaller size.  I use this with a Joey pump for my daughter. 

Tagi