Mazes ("layers")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a set of large mazes ("layers") that can be navigated with a steel ball. By default, they have a diameter of 30cm (~11.8 inches) and work well with a 6mm (1/4 inch) steel ball, but can be scaled down without problem (see picture 4 for an example).
Ideally, print them in multiple colors, but they work equally well in a single one (even though they do not look as awesome then). PLA works well.
Multiple layers can be locked together (e.g., for transport) using the attachment clips. Print 3 clips for every two layers. Place them in alternating fashion on the "fins" on the outside of the layers as shown in picture 3.