Ergonomic Bevel for Huion 420
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for your hand when using the Huion 420 graphics tablet. Ambidextrous design.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Having my hands awkwardly sliding off the side while drawing was my biggest annoyance with the cheap Huion 420 tablet. This beveled frame makes it much more comfortable to use the tablet. Note that this is for an older version of the Huion 420, which has the following dimensions 17.7cm x 0.8cm x 11.2 cm with the mini usb cable.
The tablet can be left or right oriented, with the cable slot on both sides. It needs to be printed in two pieces. Use the “split object” function in prusa slicer to break up the stl file. The unused cable slot can be covered with the included peg, perhaps with a different color to add a bit of a flair.
The slope geometry of the bevel is somewhat difficult to print. I recommend the smallest layer height your are comfortable with (I used 0.08mm) and higher perimeter extrusion widths (0.5-0.6mm)