1 / 5
Knob for the YAESU FRG-9600 VHF/UHF receiver — zdjęcie 1
1 / 5

Knob for the YAESU FRG-9600 VHF/UHF receiver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Knob for the YAESU FRG-9600 VHF/UHF receiver

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

This knob model is almost identical, to the original, as you can see in one of the photos.

This knob is designed for the YAESU FRG-9600 UHF/VHF radio receiver. In the ’80s, it was one of the best receivers in its category, and it still remains a good receiver today (although, unfortunately, there is much less to listen to now than there was in the ’80s).

After so many years, the knobs often break, and this 3D model can be very useful in such cases.

There are two STL files for this knob:

  • FRG9600-SmallKnob-v2.stl: the knob will be inserted on top of the original plastic cap.

  • FRG9600-SmallKnob-v2-nocap.stl: The knob will be inserted directly into the shaft.

This model has been generated with OpenSCAD, the source code is available on my GitHub repository. By changing the value of the variable noCap it is possible to create the knob either with or without the original cap.

Tagi