The Screw Assistant | Magnetic Screw Aligner and Picker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic alignment tool for smalls screws that are hard to pinch with a small integrated (magnetic) screw storage.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Ever tried aligning a small screw with your bare hands but ended up with no screw at all?
This aims to fix it.
This is a simple tool designed to fix a common problem: Losing small screws due to not being able to handle it. It uses a small, 6mm neodymium magnet to "grab" the smallest of screws, allowing you to perfectly align it with the hole before you bring in the screwdriver to finish the job.
- Keeping and simple and practical, it has 2 main features:
Magnetic tip:
Main part, uses the neodymium magnet to hold your screw in any direction so that you can place it where you need to, independent of orientation.
Small storage (back):
Small storage part in the back of the handle so you can put some small screws in there. Cap can be removed and placed on desk as a "cup storage" if you prefer.
Optional 6mm neodymium magnet slot to keep them in place even without the cap.
Your screws need to be attracted to magnets for this to work!
What you'll need:
- 1x 6mm neodymium magnet.
How to assemble:
Place a drop of superglue in the magnet, then with the help of a hard surface, press the magnet into the tip of the body. Repeat to the back part if you're going to use the optional storage magnet.
Print settings:
(Orca slicer)
Infil: 20-30%
Layer height: 0.2
Supports: OFF
Material: Doesn't matter
Rafts: ON
Nothing out of this was made by AI. Everything was designed and written by a real human.