E610A IEC 60318-4 Coupler + KB501X Clone Pinna "711" Headphone Measurement Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Completely 3D printed stand using clone E610A coupler and clone KB501X pinna
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Completely 3D printed, no additional parts needed, headphone measurement stand using clone E610A coupler and clone KB501X pinna. This design aims for a single ear measurement. For a double ear measurement, use smaller couplers or consider Capra Audio's IEC711 Headphone Stand instead.
The intended usage is single ear and single microphone at a time. you can either remove the ear plates to swap out microphones, or if fitment or space permits, remove the microphones/cables/pinna in situ.
Note: This stand assumes you are using a stick-styled E610A coupler. If you have a flat base or flat-plate styled coupler, it is highly recommended to design your own side legs and ear plates to best fit your specific couplers.
SolidWorks CAD files or STEP files should be modified and calibrated to accurately fit your coupler and pinnae, due to variations in manufacturing tolerance of clone equipment.
A UMIK-1 compatible flat-plate is also included for unit-to-unit variation tests. For those who do not have an UMIK-1 compatible microphone, this plate can be used either as a cable routing plate or to rest the other ear-cup of a headphone on the stand.
The headrest is adjustable for headphones with a taller profile, however the default latch and bracket are meant to remain when set, requiring removal of one of the side legs to re-adjust.
The KB501X and flat-plate are 150mm in diameter to accommodate large cup headphones. The ear to ear distance with the KB501X plate should be 150mm. Flat plate ear to ear distance is less important, just ensure complete seal of ear cups.
