Kossel Mini Motor Vertex "Heel"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On the original design, the set screws on the lower vertex may get loose, and because the belts are under tension, the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
On the original design, the set screws on the lower vertex may get loose, and because the belts are under tension, the tower extrusion may push itself to through the bottom.
I added a heel below the motor vertex to support the tower extrusion without relying on the two set screws. It also serves as foot pads for the machine.
OpenSCAD file included but you have to get the other support files from Johann's github repository - https://github.com/jcrocholl/kossel
Instructions
You can change the heel height in the .scad file.
I made mine too low so I had to print extra foot pads. oops!
A flat washer is a must for each of the 4 screws that hold the horizontal extrusions nearest the tower
Category: 3D Printer Parts