HaloWire Lamp – Modern LED Table Light

HaloWire is a modern, minimalist table lamp featuring a vertical‑wire shade that creates a soft, diffused glow. The main body consists of a semi‑transparent conical lampshade and a compact base designed to house a small commercial LED light.

The model is optimized for easy printing with no complex supports and integrates seamlessly with an off‑the‑shelf LED module.

---

####Key Features

***Total height:** ~135 mm ***Base diameter:** 70 mm ***Maximum diameter:** 120 mm ***Style:** modern, geometric, minimal ***Quick assembly:** no screws, no complicated joints ***Compatible with a commercial LED light** (link below)

---

####Recommended LED Light

This lamp is designed to fit the following LED module:

👉LED Touch Dimmer Round Light https://it.aliexpress.com/item/1005008406375499.html

The LED sits inside the base, with full access to the touch button and cable.

---

####3D Printing

###Suggested Print Settings

| Part | Material | Layer Height | Infill | Supports | | --- | --- | --- | --- | --- | | Shade | PLA / PETG | 0.20 mm | 0–10% | No | | Base | PLA / PETG | 0.20 mm | 20–30% | No |

###Tips

• For a softer glow, usetranslucent PLA ornatural PETG.
• For a more technical look, print the base inmatte black and the shade inmilky white.
• The shade is designed to print vertically without supports.

---

####Assembly

1. Print the base and the shade.
2. Insert the LED module into the bottom compartment.
3. Route the cable through the rear opening.
4. Place the shade onto the base; the fit is guided and stable.
5. Turn on the light and enjoy the ambient effect.

---

####Included Files

***Base.stl** ***Shade.stl**

---

####Designer Notes

This project explores the balance between geometry, light, and transparency. If you create a remix or a custom version, feel free to share it in the Makes section.

Category: Decor