1 / 6
Shure AA Battery Clip Adapter for ULXD2, AD2, QLXD2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These little clips are important but way too easy to lose. I created this model to replace them when necessary
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed these out of ASA for durability and then cut a piece of 1/8” frost king pipe insulation for the pad. https://www.frostking.com/products/pipe-duct-insulation/rubber-insulation-tape
Print settings with my 0.4mm HF nozzle were changed to .6mm layer height to get the detail needed. If you have a smaller nozzle like a .25mm you could get even better detail