Paintbrush Pot and Brush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this paint pot holder to hold paint pots of 33mm diameter, with an added side brush holder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
So this was designed to hold a large amount of Paint Pots I got on Amazon. Helps keeps paints organized with 12 recesses to hold paint pots up to 33mm in diameter, and an added side ledge with recesses for brushes with up to 17mm diameter. Also good for holding pens of appropriate sizes.
Amazon UK link for paint pots I use: https://www.amazon.co.uk/dp/B0B7WND9CV (100pcs)
Included STEP file for parameter adjustments, and .3mf
No supports necessary
Printed at 0.2mm layer height in ELEGOO PLA Pro
Adhesion is up to you, as I use a Cold-Tack plate, this wasn't needed. On a textured or smooth bed, I might suggest a thin layer of glue-stick application