brush cleaner - auxiliary holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aid for holding a water jig for cleaning brushes, various versions!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Aid for holding a water jig for cleaning brushes, various versions! One version is that when printed inside a lead ball with a diameter of 12 cm is inserted, the second version is that the whole product can be printed without intervention even with pins (4x pin) and then insert any weight the lower part of the model is made so that the pins can be screwed, both parts of the model have a thread. The next and last version is for a magnet, again we can print the whole model and insert magnets with a diameter of 12 mm and a length of 10 mm into the lower part and then glue the pins. You will see for yourself which version will suit you, I will leave it to your discretion.