1 / 1
Magnetic extension for Prusa MK42 heatbed (used in MK2/MK2S) - Thicker Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increased the depth of the magnet holes to fit the ones I could find that are 1" x 1/4" x 1/8"
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was unable to find good high temp magnets in the US that were the dimensions of the original design, so I modified it to fit these 1" x 1/4" x 1/8" N42SH from K&J Magnetics. Works great!