aquarium chiller - 120 mm fan/8 mm glass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix to fit on 8 mm glass like my Red Sea Max Nano. Use any M4 bolts longer than 5 mm, no threaded inserts…
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 1225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a remix to fit on 8 mm glass like my Red Sea Max Nano.
Use any M4 bolts longer than 5 mm, no threaded inserts required. I used zip-ties because I didn't have M4 bolts at hand.
This thing can easily keep 75 liter tank's temperature 2-3 °C below ambient.
I used cheap 12 V temperature controller from Aliexpress and it kept my tank within 25.0-25.2 °C range even with room temperatures reaching 27 °C.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament: Devil Design PETG Black
Notes:
Printed on side with brim and support to hold the top arc of the fan hole.
Category: Pets