Replacement power button for Argon Neo 5 enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I damaged the power button on my Argon Neo 5 enclosure for Raspberry pi.So I designed a new one, suitable to be 3D…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I damaged the power button on my Argon Neo 5 enclosure for Raspberry pi. So I designed a new one, suitable to be 3D printed. It is a quite tight space and dimensions are small (that is why I broke it...). The best result was the attached model. It protrudes 1.5mm outside the box to ensure it does not get stuck when pressed. I printed with support, 0.2mm layer, 0.4mm nozzle. Ultimaker 7 printer. Ideally would print with a transparent filament. I did not have any, so used white PLA.
Publishing it in the hope it can be useful to someone.
Category: 3D Printing