1 / 7
Stay Off Stones Artificial Marble Signage — zdjęcie 1
1 / 7

Stay Off Stones Artificial Marble Signage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sign to get people to stop walking on my front yard stone pile, which is a hazard.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have a large stone pile in my front yard. People sometimes step on the stones, which is dangerous. I once watched as our postal carrier walked on them after a rain and almost slipped. And a mom let her toddler step on them one day like it was a "hopscotch" game.  

It's a hazard. I don't want anyone getting hurt and I thought a sign might keep people off the stone pile.

At first I made a simple sign and printed it with day-glow yellow ABS. It was too obnoxious and clashed with the beautiful stream bed-like stone pile. I looked for Marble filament on Amazon, found something I liked, and designed the sign.

The model was 100% created by me, a real human, without using any AI tools.

Before I designed it, I discussed with Google Gemini the characteristics of a real-looking marble sign. It suggested the following for realism:

  • Golden ratio and chamfered edges for the rectangular sign portion

  • V-cut lettering for authenticity (and it also makes the text easily readable from all angles)

  • A "finial" at the top (the ball part above the sign)

The sign shaft has an aluminum inner core, which is a partial (three sided) rectangular tube 19.5mm by 14.5mm and about 24 inches in length. The sign and shaft are secured to the shaft using #9 1-1/8" flush head screws.  The screw caps are secured with E6000 glue. The shaft is buried in the dirt about 9 inches, facing the sidewalk. 

Marble PLA+ Filament: https://www.amazon.com/dp/B08LKLL49T?th=1

Tinkercad Sources: 

The aluminum shaft was something I had laying around - I have no idea where I got it or where to source one from.

Printed on a QIDI Plus4 printer.

Tagi