Insta360 Selfie-stick mount that fits Honda CB500X/NX500 crash-guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These mounts allow you to mount the Insta360 Selfie-stick to the Honda CB500X/NX500 crash-guard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to mount my Insta360 Selfie-stick to my motorcycle's crash-guard.
I designed these mounts to fit my Honda CB500X/NX500 crash guard, but it should fit any other crash-guard with standard 1 inch tubing. The mounts clamp both guard and stick with 3, M5x9.5 brass heat inserts and M5x20mm socket screws. I added a 1/4"- #20 threaded hole on the lower mount to accept a 1/4"- #20 slotted screw , normally used for a camera quick release plate. This will further secure the selfie-stick.
Printed in ABS. 4 side walls, 5 bottom and top layers, and 20% infill
Also check out the cable clips I made to retain a USB charge cable along the selfie-stick: https://www.printables.com/model/1661609-insta350-selfie-stick-usb-cable-clips