Prusament Spool-Based Dog Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After printing out a spool of Prusament the spool can be useless OR you can print this to show love to mans best friend.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- BSD License
Before you print this for your furry friend, you will need glue for this, also THIS IS FOR PRUSAMENT SPOOLS ONLY, OTHER SPOOLS WON'T WORK.
Print: 5x Part Connector, 1x Main Treat Holder, 1x Hole Cap Part 1, 1x Hole Cap Part 2
Assembly:
Step 1: Take out the cardboard middle of the spool
Step 2: Put one side aside for now and lay the other honeycomb-textured-side-down
Step 3: Align the main treat holder's textured side with the current top of the spool half and glue them together
Step 4: Grab the other side of the spool and lay it honeycomb-textured-side-down
Step 5: Insert hole cap part 1 like this: (Blue is hole cap part 1)
Step 6: Put the prong like parts of hole cap part 2 in the circular hole of hole cap part 1 (you'll here a snap) and rotate until it covers the part that sticks out of part 1
Step 7: Put the connecters in the holes facing inwards on the spots highlighted in blue on the side of the spool of your choice
Step 8: Align the 2 sides of the spools so the connecters align and snap them together
Where do I put the treats?
Peanut butter in the textured parts and solid treats in hole in the center of it.