Koss KSC75 flexible mounts for Oculus Rift S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slight modification of Blackrat's design where the ball socket and mounts are separated, to allow for semi-…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slight modification of Blackrat's design where the ball socket and mounts are separated, to allow for semi-flexible printing of the mount/bracket part.
Note that you'll have to print the original headphone holder and ball parts: https://www.thingiverse.com/thing:3646364.
A semi-flexible mount works quite well, fits snugly and is easier on the headband plastic.
You'll need to print the ball socket in a rigid material (PLA seems to be fine) and then glue the parts together. I used a little quick drying super glue.
I printed the mounts in a semi-flex PLA with 90A Shore rating, though I'm sure it'll work just fine with TPU too. If you're using a less filament, you might need to modify the wrap-around parts to be a little longer for better grip or other similar modification. The cable holder with my filament only barely works, so I may modify it to better encircle the cable.
Category: Computer