typewriter ish keycaps for mx switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Consider this a first revision of a keycap design i have been working on. I have found it necessary to begin anew with…
- Ocena
- 4 / 5
- Polubienia
- 36
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Consider this a first revision of a keycap design i have been working on. I have found it necessary to begin anew with the knowledge from this version.
Print Settings
Printer:
Ormerod 2 528.4
Supports:
Yes
Resolution:
0.1mm
Infill:
n/a
Notes:
Due to my extruder design i have found it necessary to extrude 100mm filament between prints since the extruder would grind the filament to the point of failing to print.
Post-Printing
Sanding
I used 240 grain "sanding cloth" from klingspor tied down to a 0.5L soda can to get a curvature that would be easy to attain with household tools.
Category: DIY