Cooling fan mount for Ormerod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The ormerod 2 comes with an acrylic piece (781) to attach a cooling fan. Sans shroud i decided to put it to use and design my own for use together with a 40x40x10 akasa fan.
Print Settings
Printer:
Ormerod 2 528.4
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1mm up past the nose and then the rest at 0.2mm
Infill:
25% Archimedean Chords
Notes:
Vertical shells: 3 layers
Horizontal shells Top: 3 layers
Horizontal shells Bottom: 3 layers
Filament: Verbatim white PLA 1.75mm
Hotend temperature: 185°C
Heated bed temperature: 65°C
Post-Printing
The upper hole on my print sagged due to printing with no cooling fan. It was drilled out with a 3mm drill. It will hinge between the acrylic part and the EM shield. To further tether it to the acrylic piece, cut a length of Q-tip and insert into one/both holes on the side.
How I Designed This
The ormerod hotend was first drawn up and assembled in solidworks so i had a "go no-go" area to work around.
Category: 3D Printer Parts