12" Speaker Grille Riser for Subwoofer, Tower Speakers, Etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser to allow overlapping two generic brand 12" speaker grilles to create a cross-hatched cover for extra protection
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted extra protection around my truck's subwoofer so I designed this riser for an Amazon generic 12" speaker grille bar set to lift one set above another and create a cross-hatch pattern when installed. I ended up buying the ones in the link below, although they're nearly identical in design to dozens of other Amazon postings for similar products so they may fit other brands. Grilles used: https://a.co/d/08WaJYPr
Print in pairs, they raise a set of bars by 9mm. I printed these in PETG with a 50% infill although that's most certainly overkill in almost all scenarios. Most materials would handle compression loads just fine although, for applications like mine in vehicles, the temperature tolerance of your chosen material should be considered.