Nextion Desktop Dashboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my desktop case for the 3.5" Nextion HMI Display (NX4832T035). I love these displays and with this case they…
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 1300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is my desktop case for the 3.5" Nextion HMI Display (NX4832T035). I love these displays and with this case they make great dashboards. The housing and cover snaps together well enough at least on my printer. There's a slit and a hole to mount a BB-ESPADP card, which I use as a programmer and the power source for my ESP8266. The case works very nice with these electronics, but you can modify it to your needs. There's quite a bit of free space inside the case.
Rotate and print the cover with the front on the build plate. The housing can be printed either standing or rotated with the opening towards the build plate. I suggest just printing it standing, you might get some drooping while bridging the top, but it isn't visible with the cover on.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: Electronics