Prusa LED Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the idea of a light in my enclosure that wasn't attached to the enclosure so that quick and easy…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 131
- Wydruki
- 2
- Wyświetlenia
- 2383
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I really liked the idea of a light in my enclosure that wasn't attached to the enclosure so that quick and easy removal of the enclosure for maintenance wasn't a hassle.
I found this one which I liked and printed, then realized the issues with it; scaling and the extruder would hit it at full height. I used it as a basis to create my own and add height to it.
After printing the LED strip holder needs to be glued together. I just used some leftover 12v LED tape strip that I had from a different project. I wired it into a spare 12v output on my power supply and control the light with a relay switch that is controlled through GPIO output via Octoprint on a raspberry pi.
update
I added some new fasteners to attach it to the ceiling of the enclosure and ditched the arms. New stl added for the fasteners.
Print instructions
Category: 3D Printer Accessories