1 / 1
Leather Honing Wheel 180 mm for Record Power WG200 — zdjęcie 1

Leather Honing Wheel 180 mm for Record Power WG200

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Leather Honing Wheel for the Record Power WG200 wet grinder.

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This is a Leather Honing Wheel for the Record Power WG200 wet grinder. It has a 12 mm hole since there may not be a need for a alu spacer sleeve. Also there is a 12x24x6 spacer for the outside so you can print the wheel without supports. The pins on the inside are exactly for the WG200 but maybe it fits also on other machines. The distance between 2 pins is 66 mm. Additionally, a leather strip (2 to 3 mm thick) at least 565 mm long and 30 mm wide is required.

Printed in PLA with 0.4 nozzle, 0.2 layer height and 15% infill. Uses about 33.4 m / 100 g filament.

Model on TinkerCad: https://www.tinkercad.com/things/gYQcxlrMxfr-leather-honong-wheel-for-record-power-wg200?sharecode=dNb4DW-06qq4sKxBdCtz5atdjHcylHH2xoeVfwQi86M

Tagi