40mm large potentiometer knob for 6mm shaft with source file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large 40mm diameter potentiometer knob for precise control.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed a large knob for a 6mm shaft potentiometer to have better control in adjusting our ventilation system.
You need one 3mm square nut (5.5 x 5.5 mm) and a 3x12mm hex screw to tighten the knob to the shaft.
I have included the Fusion360 source, step file, and pre-sliced version with color change and nut insert pause for your convenience. You should insert a square nut while printing this as it is embedded into the knob to make this work.
It is less than an hour print with no supports needed. I printed mine with Prusament PLA and 0.2 mm layer height.