Packing stretch film rotating handles for 39.5mm ID cardboard spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
rotating handles for packing film spool
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Handles to suit black stretch film roll purchased off Amazon AU, brand was TEENGA, 25cm x 150m roll.
Carboard tube was from memory either 38.5mm to 39.5mm Internal Diameter - the splined inserts are very hard to get out once in, so I can't double check the exact measuerment haha.. they should be easy to get out via cutting the cardboard tube or deforming it once the film is all finished though (the handles can come out with some force, just not the inserts!)
I've reinforced the tabs on the handle so they should be quite resistant to snapping, I think so long as your layer adhesion is good and you don't use anything silly like Silk filament it should be fine. Would advise combining the two pieces first to test their strength before attaching to the roll.
Printed in eSun PLA+ on both a Bambu A1 and A1 mini on standard .20 profiles, did not need support or brim. They are very sturdy with PLA+ using my printer. It's best to use filament with at least a tiny bit of flexibility for the tabs to bend a little when inserting the handle.
