DeLonghi Magnifica Evo purge cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purge cup that fits the tray and the contours of a DeLonghi Magnifica Evo coffee maker
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I designed a purge cup to sit on my DeLonghi Magnifica Evo (see picture) tray, fitting its contour nicely, in order to avoid having to have the purge coffee always accumulated in the tray.
It is kind of boxy with some room for holding it with your fingers on the bottom, which will require the use of supports.
I printed it using R3D PLA in black (matte), using my Snapmaker U1's fine profile (0.12mm), with 3 walls, 100% infill (you don't want that cup leaking...), with supports and no brims.
I hope you enjoy and if you have any suggestions, please let me know.