Minecraft Fox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a multicolored fox from Minecraft
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fox from minecraft. The legs, head and tail are all movable to a certain extent and can rotate freely.
I printed the main parts with PETG on a MK4 with MMU3 and the connectors with TPU on a MK4S.
The PETG parts could be printed with any filament really, just make sure that your printer is dimensionally accurate as the parts are a compression fit. No glue was used to hold this together, so all the parts can be replaced if needed. I used standard settings and a little support for some of the flat overhangs.
The connectors I printed in TPU as the flexibility makes for a very hard wearing joint material. I printed them with %100 infill so that they wont crumple when they have pressure on them.
To print you will need to download either the "MMU" version, or the "No MMU" version. Both of these will require the "TPU" parts as well.
If you have printed this model and like it, why not consider buying me a coffee.