1 / 3
SmallRig 4087 Dual Battery Charger Holder for Honeycomb Storage Wall (STEP & F3D Included) — zdjęcie 1
1 / 3

SmallRig 4087 Dual Battery Charger Holder for Honeycomb Storage Wall (STEP & F3D Included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dual holder for SmallRig 4087 charger you can attach to your HSW.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

Overview

This is a dedicated holder for the SmallRig 4087 Dual Battery Charger, designed to house two Sony NP-FZ100 (or NP-F970) batteries. The design features hexagonal cutouts on the sides to save material and maintain a "cohesive" aesthetic with Honeycomb Storage Wall designs. The charger slides in from top to bottom, leaving the USB-C port accessible.

Compatibility

  • Charger: SmallRig 4087 Dual Battery Charger (Sony NP-FZ100/NP-F970)

  • Batteries: Sony NP-FZ100 / NP-F970

  • Hardware: Requires two M3x10mm socket cap screws and two M3 nuts and nut inserts (models included from the Honeycomb Storage Wall repository).

Print Settings

  • Material: PLA

  • Orientation: Printed standing up (see below)

  • Layer Height: 0.25mm

  • Profile: Prusa MK4S Structural Profile

  • Extras: STEP and Fusion 360 (F3D) files included for easy modification.

Tagi