1 / 2
Unifi UAP AC Lite and WiFi 6 Lite standoff
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To withstand the heat of the Access-Point, i recommend to print it with PETG.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 1700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (51)Powiązane
I created this standoff as i wanted to cover my network socket at the ceiling. It is desgined for the UAP AC Lite and the WiFi 6 Lite, but should also work for all other Unifi APs with the same dimensions.
Slice it with supports from the buildplate and 40° overhang.