(WIP) Labrador Twist Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Labrador that has been made into a Twist Fidget
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Issues:
The nubbin is attached to the track in some slicers, as such some slices are attached.
Description:
The Labrador is a breed from Britain, based on St. Johns water dogs. Like all dogs, they are good dogs despite their heritage from the British Isles.
There is a current trend of "Twist Fidgets" based on spheroid shapes. This model attempts to join the Labrador and this trend.
Print Notes:
Supports are required for the snout and ears.
Verify via the sliced view that all parts are independent of each other, and that they are not joined. This screenshot example shows (circled in red with an "X" next to it) what this looks like, and your settings should be changed to ensure that all parts are free from each other.
Layer height can be anything, just ensure that the "nubbins" (circled above) are not connected to the next part.
Infill, and perimeter settings are whatever you like.
Files:
The file "Twist Dog" is the Labrador twist. The files in the "Base Model" folder are 3DWP's work, "Labrador Sculpture (Dog Statue Color 3D Scan)" (CC-BY-NC-SA) with a texture added. The files in the "Swivel Parts" folder represent some of the internal geometry that can be used to create such models.