Door Hinges Washer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In every winter, I have the problem that some of my inner doors will grind over the floor. So I took 5 minutes of my…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 161
- Wydruki
- 5
- Wyświetlenia
- 424
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
In every winter, I have the problem that some of my inner doors will grind over the floor. So I took 5 minutes of my time and created some clip-on washers for the hinges.
The inner diameter is 9.9mm and the outer diameter is 14.9mm. They are 2mm thick. They fit perfectly, but let me know if you need other dimensions and I'll upload it.
Since they can be clipped on, you don't need to take the door of the hinges. Just raise it a little bit and snap it on.
Printed in PLA.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
N/A
Filament: Prusa PLA Grey
Category: Replacement Parts