[MakerParts XS] Leadscrew Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fix for the Makerparts XS printer. That printer has several issues to align the leadscrew for the Z axis.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a fix for the Makerparts XS printer.
That printer has several issues to align the leadscrew for the Z axis.
After a lot of test, I developed this kit to reduce notably the wobble and increase the layer quality.
Bill of materials:
1 x M5 t-nut (to attach de bearing support to the profile)
1 x M5x8mm Screw
1 x leadscrew (the original 2mm per steps, or a 8mm per step)
1 x 608zz bearing
1 x 8x5 flexible coupler
Assembly:
- Put the bearing support on top position
- Insert the 608zz into the bearing support
- Pass the leadscrew screwing the trapezoidal fix
- Let the leadcrew supported to the base
- Adjust the flexible coupler at leadscrew top
- Screw the Z motor, and dont forget screw the coupler to the motor.
This fix generate a strong and precise Z advance, and free from the X axis.
That is all, try this, leave your comments, and enjoy it.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Printalot PLA Red
Category: 3D Printing