Pitan - Gear 2 to use allen bolt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I assemble my Pitan, noted the turn is not easy on entire lap. I investigated this and looks like in some…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When I assemble my Pitan, noted the turn is not easy on entire lap.
I investigated this and looks like in some countries is too difficult to get bolts that are correct centered.
For example in my country, the hexagonal bolts are not symmetrical because are not designed for this proposal. A side had 1.7mm and the other side 2.0mm
0.3mm is much difference to perform a good machining.
So I decied make a modification to allow a allen bolt. Ussualy this bolts are build with more simetrical quality.
The idea is print the parte with 6 or more walls, and dont use a low flow. Prefeable to use petg at 96 or 94 percent.
So you can embed the bolt adjusting the nut.
I implemented this gear in two printers during 2 weeks, and at moment continue working fine!
I hope this Remix can help you to make a better pitan.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.25 or 0.2
Infill:
60%
Filament: Print A Lot PETG Black
Notes:
Use more than 6 walls and more than 95% of flow.
Category: 3D Printer Extruders