"Cero"Play Miter Bars (M4 Inserts / M4 Nuts) – Zero-Play Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a metric versions of the popular zero-play miter bars, designed for M4 hardware. Versions for inserts and nuts
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These are a metric versions of the popular zero-play miter bars, designed for M4 hardware.
“CeroPlay” is a small wordplay: the C stands for Copy 😉
Specifications
Length: 200 mm
Base width: 18.25 mm
Maximum width: approx. 20 mm
Wedge angle: 10°
Included versions
Version for M4 Ruthex / CNC Kitchen short heat-set inserts
Version for standard M4 nuts
Additional files
Drilling pattern drawing
Drilling template for easier marking and alignment
Printing
I recommend PETG, ABS or ASA for better wear resistance, although PLA should also work for light use. The drilling template works great with PLA.
For best results:
0.2 mm layer height
3–4 perimeters
30%+ infill
Required Hardware
In order to use the miter bars you will need some additional hardware for each bar:
6x M4 inserts or M4 nuts depending on the version
3x M4x5mm pan head screw
3x M4x15mm pan head screw
3x large M4 washers
4,5mm drill
15mm forstner drill bit
Notes
For the adjustment and tips and tricks for building jigs with the bars I recommend the original instructions provided by the manufacturer of the original ;)
Please also keep in mind:
The final fit depends on your printer and the actual miter slot.
The 10° wedge allows very fine zero-play adjustment.
It is usually better to print slightly undersized and adjust the fit afterwards.