Tundra Tracker Battery Replacement mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer for the Tundra Tracker to allow for the installation of a larger battery during battery replacement
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
❗This is not a guide to replacing the battery, as it requires a steady hand and a great deal of care. You could damage the battery cell during this process. I am not responsible if you injure yourself or set your home on fire while doing this.❗
The model is press-fit, so be careful when attaching it to the tracker.
What works/what doesn't work anymore:
The I/O expansion port is no longer usable.
The original screws can be reused.
batteries that fit:
103040 3,7 V 1200 mAh [Battery life: 13.5 hours]
102540 3,7 V 1100 mAh [Battery life: 11.5 hours]
Things I've used:
battery Spot Welder |
nickel plated steel strips for spot welding |
small side cutter |
tweezers |