Heavy Duty Interlocking Storage System - Zodobox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy Duty 3D Printable Modular storage system. Closes tight, latches to the box above or below.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The intent of this is to provide a stackable storage system that doesnt fall apart or burst open. Each printed box can latch to the box above or below, a flexible material can be used to print the seal between the lid and the base, multiple sizes are available. More to come in the future. This box is fairly sturdy and has features implemented for future solutions.
Box can open in any direction or have no hinges at all.
Hinges and latches can be secured with a #10 x 1" screw. (24 are used if you put a screw in every available spot while not necessary I recommend it for later convenience.) When using a #10 x 1" screw no other hardware is required.
I printed this with the Prusa MK4S in PETG at 15% infill (Only place where infill really makes a difference is the bottom of the box and top of the lid) and no supports.
Tools for assembly: 1 screwdriver for the screws.
Support my work on patreon: https://patreon.com/Zodocon?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_fan&utm_content=copyLink