Lego Technic McLaren MCL39 Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple two screw wall hanger for lego 42228 McLaren MCL39 F1 Car.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 468
- Wydruki
- 0
- Wyświetlenia
- 986
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple two screw wall hanger for Lego 42228 McLaren MCL39 F1 Car.
Requires a red 2 long Lego axle piece, or a Lego Technic 2 long pin. These should be included in the extra parts with the set itself. The second picture shows where to insert the axle/pin to the mount the set.
There are two files, one for the axle and one for the pin. The pin version should not require supports.
Recommended print setting adjustments (use a standard profile for your filament and only adjust these):
4 perimeters
30% infill
0.2 layer height
Printer Hardware:
0.4mm nozzle
Filament:
I have only tested tolerances with ABS
Feel free to message me with suggestions and I will try and implement them when I have time.
Happy Printing!