Pop Up Middle Finger Box - Retractable Lanyard Spring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised to accommodate use of a retractable lanyard spring.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To combat the coil spring fatigue when storing the box closed. Used a 3mm wide metal spring from a retractable lanyard in a new gear assembly. Use original model for majority of the parts, replace the left plate and spring with these parts. I superglued the two spring body parts together once the spring was installed.
For size reference, the lanyard body I used is about 38mm in diameter and 10.5mm thick. There are plenty of different lanyard designs, but majority of them use this same style spring. You will likely need to destructively separate the body of the lanyard.
Note, the grey printed parts in my images are my first revision for testing. The spring worked in the wrong direction, I added the images to show how it works. The uploaded model was mirrored to fix the coil direction. Also, part of the left plate post broke off during my testing and is missing in the photo. I strengthened this part slightly as well.

