1 / 3
Ottokyo Drift — zdjęcie 1
1 / 3

Ottokyo Drift

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sleek racecar Otto with bold yellow colors, snap-on grill, exhausts, and TPU wheels for a street racing vibe.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
1
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Otto has been reimagined with a vibrant yellow and white body, inspired by street racing. The snap-on front grill replaces Otto’s original mouth, giving it a speed-focused look. Black exhaust pipes glued to the sides add mechanical depth and style. The wheels remain chunky but must be printed in flexible TPU to fit the new rims properly, ensuring smooth movement.

You can also print multiple in different colors to race your friends (or your enemies)! This design keeps the original Otto’s mobility and ease of assembly; perfect for fans of racing and robotics alike.

  • Follow the original Otto assembly instructions for the main build, including the motor, sensors, and wheel installation.

  • Once the main body is assembled, snap the front grill piece securely onto Otto’s face plate where the mouth originally was.

  • Apply glue carefully to attach the black exhaust pipes on each side of the robot’s body. Allow sufficient drying time to ensure they stay firmly in place.

  • No additional wiring or electronic changes are necessary; this variant focuses on exterior design enhancements.

Note: When printing, be sure to print the wheels in TPU, as PLA will not be flexible enough to fit around the new rims!

4 Wheeler Ottokyo Drift

  • 2 modes: dual servo and quad servo

  • For dual servos, be sure to use the servo arm that has the snap-on fitting built in!

Instructions for switching between 2 and 4 servo mode can be found below:

NEW! 2 Wheeler Ottokyo Drift

Uses 2 servos and the ball caster (the one included with the HP Otto base kit!)

Feel free to leave questions or comments if you have any issues! Thanks for downloading!

Tagi