The binding of Isaac pixelated completion mark list - with magnetic pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pixelated completion mark list with removable pieces
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I found someone selling makes of this on tiktok and had a friend who is a fan of TBoI ask me to make something similar, but pixelated instead of a rounded one. I traced the pixelated image by hand in CAD and created a height difference for different colored layers. The pieces are removable and have slots for 5x2 cylindrical magnets. Magnets can be pressed or glued in place
STEP file provided, but you need to set X and Y scale to 210%, and Z to 100% to match the STLs
Printing: Print with 0.2 layers. Filament colors, assuming 0.2 mm layers and model printed as-is:
Base: start with black, change to white on layer 7 (1.4mm), change to red on layer 18 (3.6mm)
Circle - grey
Pieces - start with red, change to grey on layer 14 (2.8mm)
Post-process: press or glue in the magnets, and glue the grey cirlce in the corresponding spot. 5x2 neodymium magnets should have enough holding power for the entire thing to be wall-mounted without the pieces falling off.